First Aid Kits: ANSI Standards
The American National Standards Institute (ANSI) revised the standard relating to first aid kits in the workplace. ANSI Z308.1-2003 has been replaced by ANSI Z308.1-2009. There are a few changes that you need to pay attention to. The old standard listed eight items that were required as minimum fill for workplace first aid kits. The new standard brings the required items total to ten. The other notable change is that latex is to be eliminated from first aid kits.
The REQUIRED items are:
(1) First Aid Guide
(1) Absorbent Compress, 4" x 8" minimum
(16) Adhesive Bandages, 1" x 3"
(1) Adhesive Tape, 2.5 yard roll
(10) Antiseptic Treatment Applications, 0.9 gram each
(6) Burn Treatment Applications, 0.9 gram each
(4) Sterile Gauze Pads, 3" x 3"
(2) Pair Medical Exam Gloves
(1) Triangular Bandage, 40" x 40" x 56" minimum
(8) Antibiotic Ointment Treatment Applications, 0.5 gram each
There are also now ten items listed as RECOMMENDED Supplies. The items are:
Bandage Compress, 2" x 35" minimum
Breathing Barrier, single use
Burn Dressing, 12 square inches
Cold Pack, 4" x 5" minimum
Eye Covering, 1/4" thick, minimum
Eye/Face Wash, sterile, 4 oz. minimum
Roller Bandage, 2" x 4 yards
Hand Sanitizer, 0.9 gram minimum
The new standard also calls for kits to be labeled with specific wordage. The label should read as follows: "Caution! This kit meets ANSI/ISEA Z308.1-2009 only when required minimum fill is maintained with first aid products marked 'ANSI/ISEA Z308'." The required kit may be suitable for some businesses. However, the adequacy of the contents for hazards of each work environment should always be evaluated by competent personnel. For a variety of operations, employers may find that additional first aid supplies and kits are needed. - Updated May 2010
Shop First Aid Kits