1. Incoming Water Sampling

Install a QualiTru TruStream Sanitary Port to test for water ions (calcium, magnesium, sulfate, sodium, chloride, and bicarbonates) and microorganism counts.

2. Whirpooling

Install a QualiTru TruStream Sanitary Port to test wort for specific gravity, turbidity, and microbiological contamination.

3. Wort Cooling and Peristaltic Pump

Install a inline QualiTru TruStream Sanitary Port to test for microbiological contamination. The peristaltic pump is the key to a controlled sample volume of wort that is collected into the QualiTru Sterile Collection Bags. Since the sampling is a constant flow, you get a complete representative sample of all wort that enters the fermentation tank for the most dependable quality sample available.

4. Fermentation Tank

Install a QualiTru Sanitary Recessed Port in the fermentation tank to obtain an aseptic sample at various times throughout the fermentation process.

5. Filtering

Install a QualiTru TruStream Sanitary Port before and after each piece of equipment as part of a system diagnostic function to check for alcohol, turbidity, yeast counts, and microbiological contamination.

6. Finished Product Sampling

Install a QualiTru TruStream Sanitary Recessed Port in the finished goods tank to obtain quality samples throughout the beer maturation process.

7. Filler

Install a QualiTru TruStream Sanitary Port just prior to the filler to obtain a quality sample. Can also be used to check the effectiveness of the system CIP process.

8. Clean in Place (CIP)

Install a QualiTru TruStream Sanitary Port to sample CIP rinse water to ensure the effectiveness of the process.