Welcome to our new digital experience.
800-826-8302 Contact Us

Cheese Processor Application Sites

1. Milk tanker truck sampling

Install a QualiTru Sanitary Recessed Port with Security Lid, an official Pasteurized Milk Ordinance (PMO) Appendix N (antibiotic) sample can be obtained at the processing plant without the need to climb to the top of the milk tanker truck, assuring a safer, physical sampling environment for certified samplers.

2. Receiving bay sampling

Install a beveled seat Qualitru TruStream Sanitary Port at the outlet valve on a tanker truck. A representative milk sample can be collected via a peristaltic pump and sterile collection unit as the tanker truck is being unloaded in the receiving bay, improving operation efficiencies and reducing receiving operation efficiencies.

3. Raw product sampling

Install a QualiTru TruStream Sanitary Recessed Port in the raw receiving silo for regulatory or milk quality samples.

4. System diagnostic

Install a QualiTru TruStream Sanitary Port at any location throughout your fluid path as part of the diagnostic function, system quality check, Clean in Place (CIP) cleanliness check and overall milk quality samples.

 

5. Post-pasteurization monitoring

Install a QualiTru TruStream Sanitary Port on the backside of the pasteurizer to monitor post-pasteurization contamination and to verify pasteurization effectiveness and efficiency. This application can also be part of the diagnostic function, system quality check, CIP cleanliness check and overall milk quality samples.

6. Inoculating

Port or Recessed Port on the exterior of the vat. This allows access to inoculate the milk with specific cultures while keeping the system closed to the environment. This unique approach helps to mitigate the risk of unwanted microorganisms from entering the vat and contaminating the product.

7. Whey analysis

Install a QualiTru TruStream Sanitary Port off the vat outlet valve and prior to the whey storage tank or silo for regulatory or quality samples. Whey filtration sampling is used primarily for process monitoring/solid analysis.